Handheld Laser Guide
All guides

Best Handheld Laser Welders (2026): Eight Portable Models Compared, and What They Actually Weld

By Stefan FlorinUpdated 13 min read

Research-based, not hands-on: we have not tested these machines. Some links may pay us a commission, which never changes the order or the verdict. See our editorial policy.

Six handheld laser welders arranged in a row in a fabrication shop

Quick picks

What a handheld laser welder is

A handheld laser welder is a fiber laser in a gun you hold like a TIG torch. A wire feeder and shielding gas usually come with it. The models below run from $2,999.99 to $8,499, and the makers claim welds from about 0.5 mm up to 5 mm in steel. Those are claims. We have not tested any machine.

The main attractions, as reported by Miller Electric and by Fabricating & Metalworking, are lower heat input, less distortion and a shorter learning curve than TIG. The main drawbacks are tighter fit-up tolerance, a Class 4 laser to manage and a limit on thick joints without filler wire.

How we picked

We have not used these machines. We read each maker's own page, first on October 4, 2026 and again on October 18, 2026 (OMTech 1500W, ARCCAPTAIN, xTool and the X1 Pro again on October 30, when we also added the ARCLUME AIR 500, and the prices of the last three again on November 5 for Black Friday), kept the figures that could be checked and flagged the rest. The order below is by price, lowest first. It is not ordered by commission, and our editorial policy explains the method. If you want to know which of these links may pay us, the affiliate disclosure says so.

The comparison

ModelPriceLaserWeightPower inputWarranty
Xlaserlab X1$2,999.99460 W diode13 kg220 V only1 year
Xlaserlab X1 Pro$3,399.99700 W fiber21 kg100 to 250 V1 year
OMTech 1000W$3,599.99 (sold out)1000 W fiber50 kg220 to 240 V1 year
ARCLUME AIR 500 3-in-1 Handheld Laser Welder$3,999.99 (pre-order)500 W fiber15 kg (main unit)110 to 240 V3 years
xTool MetalFab 800W$4,499 ($3,999 at checkout until December 4)800 W fiber35 kg200 to 240 V12 months
OMTech 1500W$5,299.99 (pre-order)1500 W fiberNot stated220 V1 year
ARCCAPTAIN LW1200 1200W Handheld Laser Welder$6,8991200 W fiberNot stated220 V3 years
Everlast RedSabre 1500$8,4991500 W fiber82 kg240 V5 years

What the makers claim these machines weld

Thickness is the figure buyers ask about first and the one sellers are loosest with. These are each maker's own words, not our measurements. Prices stay in the table above, so the two can never drift apart:

ModelPowerMaker claim
Xlaserlab X1460 W diode0.2 to 2 mm stainless and carbon steel
Xlaserlab X1 Pro700 W0.5 to 3 mm
OMTech 1000W1000 WCarbon steel 3 mm, aluminum 1 mm
ARCLUME AIR 500 3-in-1 Handheld Laser Welder500 WSteel 0.5 to 3 mm, aluminum 0.5 to 1.5 mm
xTool MetalFab 800W800 WUp to 4 mm
OMTech 1500W1500 WStainless and carbon steel 4 mm, aluminum 2 mm
ARCCAPTAIN LW1200 1200W Handheld Laser Welder1200 WRecommended to 0.14 in, maximum 0.20 in
Everlast RedSabre 15001500 WSteel 4 mm, aluminum 3.5 mm

The xTool 1200W carries a 5 mm claim at a higher price, but xTool's own pages disagree on its circuit requirement, so we left it out of the table. For running costs on top of the purchase, see what a laser welder costs to own.

Where the thickness claims run out

Fabricating & Metalworking reports that filler wire is needed "for joints requiring penetration beyond approximately 2 mm" and calls handheld laser welding "not a universal replacement for conventional welding". Take the claim column above as the best case with the right wire, gas and settings, from the people selling the machine.

xTool cites an SGS test to ISO 15614-1 (tensile, dye penetrant and metallographic checks) for its 5 mm claim. That is more than most makers offer. It is still one test on one setup, and it does not qualify your own welds.

What a handheld laser welder is good at

  • Thin stainless and sheet metal. Miller says laser welding puts in roughly 50% of the heat of TIG or MIG on thin carbon steel, with a narrow heat-affected zone and less warping.
  • Clean appearance. Miller notes no arc-related spatter and minimal cleanup after the weld.
  • Speed on long seams. Fabricating & Metalworking reports "substantially higher travel speeds" than TIG. Miller says TIG is better suited to short welds.
  • A faster start for new operators. Fabricating & Metalworking says new operators can often produce acceptable cosmetic welds much sooner than with TIG.

Where it struggles

  • Fit-up. Both sources agree that laser welding tolerates less gap than arc processes by default. Miller says MIG is better "for joints with variable fit-up".
  • Reflective metals. For aluminum and copper we found only manufacturer data and no independent source.
  • Code and structural work. We found no independent source on handheld lasers for code welding. Ask your inspector before you assume a procedure will pass.

How portable is a "portable" laser welder?

Almost every listing calls itself portable. In practice that word covers two different things:

  • Carry it by the handle. Three are light enough: the X1 at 13 kg, the AIR 500 at about 15 kg for the main unit (its wire feeder is a separate box) and the X1 Pro at 21 kg. Those are the makers' spec tables; each Xlaserlab unit has a second Xlaserlab page that gives a lower figure. You can put one in a car and take it to a job.
  • Roll it on casters. The xTool MetalFab weighs 35 to 38 kg, the OMTech 1000W 50 kg and the Everlast 82 kg. The ARCCAPTAIN is a cart on casters with no weight stated. These move around a shop floor, not up a ladder.

Power input matters as much as weight. Two machines here take a standard US 120 V outlet: the X1 Pro (100 to 250 V) and the AIR 500 (110 to 240 V, or a compatible portable power station). Every other unit wants 200 to 240 V, which means a dryer-style circuit in a home garage or a 240 V drop in a shop. The X1 is 220 V only, and Xlaserlab suggests a step-up transformer it does not sell.

The cheapest laser welder, and what you give up

At $2,999.99 the Xlaserlab X1 is the lowest price we found. It is a diode laser (976 nm), not a fiber laser like every other machine on this page. Xlaserlab lists 0.2 to 2 mm stainless and carbon steel, with pulsed and spot welding modes. The page never mentions filler wire or a wire feeder, and aluminum is missing from its own materials list. That makes it a tool for thin sheet, brackets and small repairs, not for plate or long structural seams.

If you need a filler wire or more than 2 mm, the step up is the X1 Pro at $3,399.99. The OMTech 1000W lists for $3,599.99 with a wire feeder included, but it was sold out when we checked, and it needs a 220 to 240 V circuit.

Which one for which buyer

Thin sheet on a budget: Xlaserlab X1

The cheapest way into laser welding on this list, with the limits above. It shows an add-to-cart button and an "Email me when available" form at the same time, so confirm stock before you plan around it.

Cheapest fiber 3-in-1 on a 120 V outlet: Xlaserlab X1 Pro

At $3,399.99 for the Standard Kit (the Professional Kit is $4,099.99), it welds, cleans and cuts, and lists 100 to 250 V input. Those are Black Friday prices; Xlaserlab says they go back to $3,799.99 and $4,299.99 after December 4. Its warranty is the shortest here, 1 year plus a 60-day replacement for major hardware failures. The page contradicts itself twice: it calls the dual wire feeder both included and optional, and gives 21 kg in the specs and 19 kg in the FAQ. Its claim of 0.5 to 3 mm suits sheet metal rather than plate. The page has said "FDA & CE MD Approved". The FDA does not approve these products, and we found no accession number, so ask for it. Our X1 Pro review goes through the kit and the contradictions in detail.

Heavy and inexpensive, when in stock: OMTech 1000W

A welder with a wire feeder, safety glasses and nozzles included, at $3,599.99. It weighs 50 kg and needs 220 to 240 V. It was sold out on October 18, even though the page still promised shipping in 1 business day.

Lightest fiber 3-in-1, on pre-order: ARCLUME AIR 500 3-in-1 Handheld Laser Welder

ARCCAPTAIN's smaller machine lists at $3,999.99 against a $5,199.99 "regular" price, with $500 off at checkout during the presale. It is a 500 W air-cooled fiber unit that welds, cleans and cuts, at about 33 lb (15 kg) for the main unit. It takes 110 to 240 V or a compatible portable power station, so it is the second machine here that runs on a US household outlet. The box lists a wire feeder, OD 6+ laser safety glasses, gloves and 10 protective lenses, and the warranty is 3 years. ARCCAPTAIN claims 0.5 to 3 mm in steel and 0.5 to 1.5 mm in aluminum, so this is a thin-sheet machine like the X1 Pro. Two things to check: the page says both that shipping starts November 10 and that pre-orders ship December 1, 2026, and it calls the machine "FCC FDA Certified", which is not something the FDA does.

Best documented: xTool MetalFab

$4,499 for the 800 W with an integrated wire feeder (shown against $4,699), $6,699 for the 1200 W with a separate feeder included (against $7,999). Until December 4 xTool's page takes $500 and $700 off at checkout, which makes them $3,999 and $5,999. xTool lists up to 4 mm (800 W) or 5 mm (1200 W) of stainless or carbon steel, air cooling and 200 to 240 V input. It also publishes a test citation (SGS, ISO 15614-1) and a list of safety features such as a nozzle-contact trigger, an interlock and ground detection. When we checked, it showed shipping in 3 to 5 business days. Earlier, xTool's own pages gave different circuit requirements for the 1200 W, so confirm the circuit before you wire one in. More in our xTool MetalFab review, and if you are choosing between the two cheapest 3-in-1s, see MetalFab vs X1 Pro.

Most power for the money: OMTech 1500W

A water-cooled 3-in-1 at $5,299.99 with a 2000 W chiller, an automatic wire feeder and 220 V input. OMTech lists 4 mm steel and 2 mm aluminum. It is sold as a pre-order shipping December 30, yet the same page says orders ship in 1 business day. Weight and laser class are not stated, and glasses are not included.

Longest warranty among the imports: ARCCAPTAIN LW1200 1200W Handheld Laser Welder

Three years and a US warehouse at $6,899, a Black Friday sale price that was $7,299 on October 30. The page gives no price for after the sale. On November 5, 2026 it said in-stock orders ship within 2 business days. The store now titles it the ARCLUME LW1200. It lists an integrated wire feed with a 10 lb spool in the box, air cooling and 220 V input. Weight is not stated. Our LW1200 review covers what the box contains and what the page leaves out.

Most support: Everlast RedSabre 1500

At $8,499 it costs nearly three times the cheapest unit and comes with a 5-year warranty from a US seller. It weighs 181 lb (82 kg), needs 240 V single phase and includes a wire feeder. Everlast lists 4 mm steel and 3.5 mm aluminum, the highest aluminum figure here. Shipping cost is not stated, and Everlast's pages give the stronger RedSabre 2000 a lower weight than the 1500, so one of those figures is likely wrong.

Where to buy a handheld laser welder

All eight are sold direct from the maker's own store. That matters more than usual here, because stock and ship dates move fast:

  • Ships now: xTool MetalFab (3 to 5 business days), the ARCCAPTAIN LW1200 (2 business days, per its page) and the Xlaserlab X1 Pro, which promises a gift if your order has not shipped within 5 working days.
  • Pre-order: OMTech 1500W, shipping December 30, and the ARCLUME AIR 500, which the page dates both November 10 and December 1.
  • Sold out or unclear: OMTech 1000W (sold out) and Xlaserlab X1 (mixed signals on the page).
  • Not stated: Everlast shipping cost.

If you are comparing total price, add eyewear, shielding gas, extraction and spare parts. Our laser welder cost guide adds those up.

Ten things to check before you buy

  • Voltage and circuit. Some units take 100 to 250 V. Others need 220 to 240 V and 20 A or more.
  • Cooling. Air or water, and where the chiller sits.
  • What the box contains: wire feeder, wire, nozzles, lenses and eyewear.
  • Eyewear wavelength band. Fiber welders run near 1080 nm. See our safety guide.
  • Key switch, remote interlock and emergency stop. Class 4 products need them.
  • The FDA accession number for the model. Ask for the number, not for the word "compliant".
  • Who pays duties and return shipping.
  • Warranty length and what it excludes.
  • Where the shielding gas comes from and what a refill costs near you.
  • Whether you have a plan for fume extraction.

Our safety guide explains why the eyewear, interlock and FDA items on that list matter most.

What we could not verify

  • Weld quality and penetration depth on any machine, and gas and wire consumption per hour.
  • Weight of the OMTech 1500W and the ARCCAPTAIN LW1200.
  • Plug type on the xTool MetalFab and the ARCCAPTAIN LW1200. Both list a voltage range; neither names the connector.
  • Whether any of these models carries an FDA accession number.
  • Whether pre-order dates will hold, and which of the two AIR 500 ship dates is right.

For how laser welding compares with TIG, see laser welder vs TIG. For first-year costs, see laser welder cost.

Machines in this guide

Figures are from each maker's own page. Links go to the maker and may be affiliate links; see our disclosure.

Xlaserlab X1 diode welder

Welder

Xlaserlab X1 diode welder

$2,999.99

Ultimate Pack, shown as reduced from $3,699

Code AFF5: 5% off sitewide, on top of sale prices at Xlaserlab

Laser
460W diode, 976 nm
Cooling
Air
Maker claim
Stainless and carbon steel 0.2 to 2 mm; pulsed and spot welding
Warranty
1 year
Weight
13 kg (another Xlaserlab page says 12 kg)
Power input
220 V only

The cheapest laser welder we found, made for thin sheet. It is a diode, not a fiber laser, the page never mentions filler wire, and it will not run on a 110 to 120 V outlet.

What we could not verify
  • The page says it runs only on 220 V and suggests a step-up transformer, which Xlaserlab does not sell.
  • Aluminum is missing from its own materials list, although the X1 Pro page lists aluminum for the X1.
  • The page shows an add-to-cart button and an "Email me when available" form at the same time.

Price read from the maker's page on October 18, 2026. It will have changed by the time you click.

Xlaserlab X1 Pro

Welder + cleaner + cutter

Xlaserlab X1 Pro

$3,399.99

Standard Kit, Black Friday price, then $3,799.99 after December 4; Professional Kit $4,099.99, then $4,299.99

Code AFF5: 5% off sitewide, on top of sale prices at Xlaserlab

Laser
700W fiber
Cooling
Air
Maker claim
Welds 0.5 to 3 mm; cuts up to 3 mm
Warranty
1 year, plus 60-day replacement for major hardware failures
Weight
21 kg (its own FAQ says 19 kg)
Power input
100 to 250 V, runs on a US 120 V outlet

The cheapest fiber 3-in-1 here, and it runs on a standard US 120 V outlet. The lowest entry price also means the shortest warranty.

What we could not verify
  • The maker says it is "FDA & CE MD Approved". The FDA does not approve these products and we found no accession number.
  • The page says a dual wire feeder is included and, a few lines later, that it is optional. Ask which kit includes it.
  • Thickness claims range from 0.5 to 3 mm in the specs to "0.2mm to 5mm" in the marketing copy.

Price read from the maker's page on November 5, 2026. It will have changed by the time you click.

Welder

OMTech 1000W air-cooled

$3,599.99

Shown as reduced from $7,499.99

Laser
1000W fiber
Cooling
Air
Maker claim
Carbon steel 3 mm, aluminum 1 mm, single side
Warranty
1 year
Weight
50 kg
Power input
220 to 240 V

A welder with a wire feeder, safety glasses and nozzles included, but a heavy 50 kg unit that wants 220 to 240 V.

What we could not verify
  • Sold out on October 18, 2026, although the page still says orders ship in 1 business day.
  • Laser class is not stated on the product page.
  • The "was" price is a marketing anchor. Judge it at the price you pay.

Price read from the maker's page on October 18, 2026. It will have changed by the time you click.

ARCLUME AIR 500 3-in-1 Handheld Laser Welder

Welder + cleaner + cutter

ARCLUME AIR 500 3-in-1 Handheld Laser Welder

$3,999.99

Pre-order, shown against a $5,199.99 regular price; the page offers $500 off at checkout during the presale

Laser
500W fiber
Cooling
Air, no external chiller
Maker claim
Stainless, carbon and galvanized steel 0.5 to 3 mm; aluminum 0.5 to 1.5 mm
Warranty
3 years
Weight
About 33 lb (15 kg), main unit
Power input
110 to 240 V AC, or a compatible portable power station

The lightest fiber 3-in-1 here, made for thin sheet, with a 3-year warranty and laser safety glasses in the box. It is a pre-order, and the page gives two different ship dates.

What we could not verify
  • The page says shipping starts November 10 in one place and that pre-orders ship December 1, 2026 in two others.
  • The page says "FCC FDA Certified". The FDA does not certify these products and we found no accession number.
  • The wire feeder is a separate unit in the box, so the 33 lb covers the main unit only.
  • Current draw on a 120 V circuit is not stated.

Price read from the maker's page on November 5, 2026. It will have changed by the time you click.

xTool MetalFab 800W

Welder + cleaner + cutter

xTool MetalFab 800W

$4,499

800W, shown as reduced from $4,699, with $500 off at checkout until December 4 ($3,999); the 1200W is $6,699, with $700 off ($5,999)

Laser
800W fiber (1200W also sold)
Cooling
Air
Maker claim
Welds up to 4 mm (800W) or 5 mm (1200W)
Warranty
12 months, longer plans sold separately
Weight
35 kg (800W), 38.2 kg (1200W)
Power input
200 to 240 V

The best-documented option, with a cited third-party test of the weld and goggles listed as included. The electrical specs differ between xTool's own pages, so check them before you wire a circuit.

What we could not verify
  • xTool's pages give three different circuit requirements for the 1200W.
  • Plug type is not stated.

Price read from the maker's page on November 5, 2026. It will have changed by the time you click.

Welder + cleaner + cutter

OMTech 1500W 3-in-1

$5,299.99

Shown as reduced from $10,599.99

Laser
1500W fiber
Cooling
Water (built-in chiller, per the listing)
Maker claim
Stainless and carbon steel 4 mm, aluminum 2 mm
Warranty
1 year
Power input
220 V

Welds, cleans and cuts, with an automatic wire feeder and 20 nozzles. Laser safety glasses are not included.

What we could not verify
  • Sold as a pre-order shipping December 30, while the same page says orders ship in 1 business day.
  • Weight and laser class are not stated.
  • Shielding gas (argon or nitrogen) is not included.

Price read from the maker's page on October 30, 2026. It will have changed by the time you click.

ARCCAPTAIN LW1200 1200W Handheld Laser Welder

Welder + cleaner + cutter

ARCCAPTAIN LW1200 1200W Handheld Laser Welder

$6,899

Black Friday sale price, shown against a $10,999 regular price; it was $7,299 on October 30

Laser
1200W fiber
Cooling
Air, no external chiller
Maker claim
Recommended up to 0.14 in (3.6 mm); maximum penetration up to 0.20 in (5 mm)
Warranty
3 years
Weight
Not stated (cart on casters)
Power input
220 V

The longest warranty of the three-in-ones and a US warehouse, at a price that is close to a 1200W xTool.

What we could not verify
  • The store now titles it the ARCLUME LW1200.
  • The page shows a sale countdown, but we could not read an end date or the price after it.
  • The page lists built-in wire feeding, while its FAQ calls it compatible with external wire feeders.
  • Weight and the torch head size are not stated.
  • Return and tariff terms were not stated on the page.

Price read from the maker's page on November 5, 2026. It will have changed by the time you click.

Welder

Everlast RedSabre 1500

$8,499

Shown as reduced from $9,999.99

Laser
1500W fiber
Cooling
Air
Maker claim
Stainless and mild steel 4 mm, aluminum 3.5 mm
Warranty
5 years
Weight
181 lb (82 kg)
Power input
240 V single phase

Priced well above the imports, with a 5-year warranty from a US seller. The one to look at if support matters more than the sticker price.

What we could not verify
  • Everlast's page says 181 lb for the 1500 and 135 lb for the more powerful 2000. One of those is probably wrong.

Price read from the maker's page on October 18, 2026. It will have changed by the time you click.

Keep reading