Handheld Laser Guide
All guides

xTool MetalFab Review (2026): The Best-Documented 3-in-1, and What It Asks of Your Shop

By Stefan FlorinUpdated 6 min read

Research-based, not hands-on: we have not tested these machines. Some links may pay us a commission, which never changes the order or the verdict. See our editorial policy.

A handheld laser welding gun welding a thin stainless steel sheet on a steel table

The short verdict

The xTool MetalFab is the handheld laser welder with the most evidence behind it: a named third-party weld test, a published safety system, goggles in the box and a US support team. It is not the cheapest, it needs a 200 to 240 V circuit, and xTool's own pages have disagreed about what that circuit should be. If you have 240 V and want the safest bet among the 3-in-1s, it is the one to start with.

We have not used a MetalFab. This review is built from xTool's product page, read on October 30, 2026 with the price read again on November 5, its specification pages read on October 18, and the sources named below. Our editorial policy explains the method, and the affiliate disclosure says which links may pay us.

Price and versions

VersionPriceShown againstWire feederWeld claim
MetalFab 800W$4,499$4,699Built into the machineUp to 4 mm steel
MetalFab 1200W$6,699$7,999Separate feeder, includedUp to 5 mm steel

Black Friday: until December 4 xTool's page takes $500 off the 800W and $700 off the 1200W at checkout, which makes them $3,999 and $5,999. The page shows "Saved $700" and "Saved $2,000" against the higher prices, which matches those figures, but we did not place a test order. It also shows a gift pack that xTool values at $150 with either version.

The list price fell in late October. On October 18 the 800W listed at $4,699 with $200 off at checkout; on October 30 $4,499 was the sticker price with no separate cart discount. The 1200W dropped from $7,999 to $6,699. xTool also sells a "Laser Welder + CNC Cutter" bundle with a cutting table, which we have not priced here.

What xTool claims it does

  • Welding. Up to 4 mm stainless or carbon steel on the 800W and 5 mm on the 1200W. xTool says the 5 mm figure passed SGS testing to ISO 15614-1, with tensile, dye penetrant and metallographic checks.
  • Handheld cutting. Up to 3 mm.
  • Cutting on xTool's CNC platform. Burr-free cuts in 3 mm stainless and 8 mm carbon steel on the 800W, and 5 mm stainless, 4 mm aluminum and 10 mm carbon steel on the 1200W.
  • Cleaning. Listed as a mode. For wider rust and paint removal xTool sells the MaxClean 45 mm accessory at $299.

xTool adds a footnote that all its specifications come from "internal testing conducted under optimized conditions". Read every figure above as the best case. Fabricating & Metalworking reports that filler wire is needed for joints deeper than about 2 mm, so the higher figures assume wire, gas and the right settings.

Specifications

800W1200W
Laser800 W fiber1200 W fiber
CoolingAirAir
Weight35 kg38.2 kg
Input200 to 240 V200 to 240 V
Gun550 g, quick release550 g, quick release
Screen8-inch touchscreen, 108+ built-in parameter setsSame
Warranty12 months; xToolCare plans up to 3 years sold separatelySame

The weights and input range are from xTool's specification pages as read on October 18. The plug type is not stated anywhere we looked.

What is in the box, and what is not

xTool lists OD 6+ laser welding goggles and heat-resistant gloves as included, and a free wire feeder with the 1200W. The page also offers free installation and commissioning. You still need:

  • Shielding gas. xTool asks for argon or nitrogen above 99.99% purity, at 0.1 to 0.2 MPa and 15 to 30 L/min. Argon is required for titanium.
  • Filler wire. xTool's own 5 kg spools are cheap: ER70S-6 carbon steel at $32.99 and ER308L stainless at $115.99.
  • Spare protection lenses. A 10-pack is $99. xTool estimates a pack lasts about 2 months.
  • Fume extraction and a controlled laser area. See our safety guide.

Our laser welder cost guide puts a first year with the 800W, one argon refill, a spool of stainless wire and a fume extractor at about $4,935 at the Black Friday price, or $5,435 after it, before tax, shipping and electrical work.

Safety features

xTool names an emergency stop, an interlock, a safety circuit, dual trigger buttons and a nozzle that only fires when it touches the workpiece. That list is more specific than most competitors publish. It does not replace a Class 4 laser area: everyone in line of sight needs eyewear rated for about 1080 nm at the optical density xTool specifies.

What we like

  • Evidence. A named test lab and standard behind the headline thickness claim. No other maker on our list names one.
  • Support. Local service teams in the US and Europe, 24/7 online support and bookable demo rooms, by xTool's account.
  • Running costs. xTool's wire is the cheapest we found: its 5 kg carbon steel spool costs less than half of Xlaserlab's, and its stainless about two-thirds.
  • Stock. "Order today, ships in 3-5 business days" on October 30.

What gives us pause

  • The circuit. xTool's pages have given three different circuit requirements for the 1200W. Get the figure in writing before an electrician quotes the job.
  • Weight. At 35 to 38 kg it rolls around a shop rather than travelling to jobs. The Xlaserlab X1 Pro is 21 kg.
  • No 120 V option. If your garage has no 240 V circuit, add the cost of one.
  • Returns. xTool lists a 14-day return window with fees of 10% to 30% of the order total depending on use, so a change of mind on a used machine is expensive. The cost guide has the tiers.
  • Reviews. The page shows 65 customer reviews and a set of creator videos. Both are chosen and shown by xTool, so they are not independent evidence.

Who it suits

A small fabrication or repair shop with a 240 V circuit, welding mostly steel and stainless up to about 4 mm, that values documentation and support over the lowest price. If you work from a 120 V outlet or mostly weld thin sheet, compare it with the X1 Pro in our MetalFab vs X1 Pro guide, and see the best handheld laser welder list for the rest of the field.

What we could not verify

  • Weld quality on any machine we have not used, including this one.
  • The correct circuit rating for the 1200W.
  • The plug type supplied in the US.
  • Whether the SGS test report covers the 800W as well as the 1200W.

Machines in this guide

Figures are from each maker's own page. Links go to the maker and may be affiliate links; see our disclosure.

xTool MetalFab 800W

Welder + cleaner + cutter

xTool MetalFab 800W

$4,499

800W, shown as reduced from $4,699, with $500 off at checkout until December 4 ($3,999); the 1200W is $6,699, with $700 off ($5,999)

Laser
800W fiber (1200W also sold)
Cooling
Air
Maker claim
Welds up to 4 mm (800W) or 5 mm (1200W)
Warranty
12 months, longer plans sold separately
Weight
35 kg (800W), 38.2 kg (1200W)
Power input
200 to 240 V

The best-documented option, with a cited third-party test of the weld and goggles listed as included. The electrical specs differ between xTool's own pages, so check them before you wire a circuit.

What we could not verify
  • xTool's pages give three different circuit requirements for the 1200W.
  • Plug type is not stated.

Price read from the maker's page on November 5, 2026. It will have changed by the time you click.

Keep reading