Handheld Laser Guide
All guides

xTool MetalFab vs Xlaserlab X1 Pro (2026): Which 3-in-1 Laser Welder to Buy

By Stefan FlorinUpdated 5 min read

Research-based, not hands-on: we have not tested these machines. Some links may pay us a commission, which never changes the order or the verdict. See our editorial policy.

Two welded stainless steel test pieces and two spools of welding wire on a steel table

The short answer

  • Choose the [Xlaserlab X1 Pro](/go/xlaserlab-x1-pro/) if you have no 240 V circuit, weld sheet metal up to about 3 mm, or need to carry the machine to jobs. It is about $600 cheaper to buy until December 4, and about $700 cheaper after.
  • Choose the [xTool MetalFab](/go/xtool-metalfab/) if you have 240 V, weld up to 4 mm, and want a documented weld test, US support and cheaper wire. Over a first year the gap narrows to about $341, or about $441 after December 4.

We have not used either machine. Both pages were read on October 30, 2026, and the prices again on November 5. Both makers are running Black Friday prices until December 4, so we show those first. The full reviews are here: xTool MetalFab review and Xlaserlab X1 Pro review. The affiliate disclosure says which links may pay us; both of these may.

Side by side

Xlaserlab X1 ProxTool MetalFab 800W
Black Friday price$3,399.99 (Standard Kit)$3,999 at checkout
Price after December 4$3,799.99$4,499
Laser700 W fiber800 W fiber
Input100 to 250 V, runs on 120 V200 to 240 V
Weight21 kg (19 kg in its FAQ)35 kg
Weld claim0.5 to 3 mm steelUp to 4 mm steel
Handheld cuttingUp to 3 mmUp to 3 mm
Evidence for the weld claimNone namedSGS test to ISO 15614-1, cited by xTool
Wire feederIncluded, single or dual depending on the kit (the page is inconsistent)Built in
Eye protection in the boxHelmet and gogglesGoggles and gloves
Warranty1 year, plus 60-day hardware replacement12 months, longer plans sold separately
Returns30 days, unused only, 8% to 15% fee14 days, 10% to 30% fee by condition
Ships3 to 5 business days to Canada, UK and most of the EU; US not stated3 to 5 business days
DiscountCode AFF5 for 5%, which Xlaserlab says stacks with the sale price ($3,229.99)$500 off at checkout until December 4

The 1200 W MetalFab ($6,699, or $5,999 at checkout until December 4, up to 5 mm) has no counterpart at Xlaserlab, so it is not in the table.

Power is the first question

The X1 Pro takes 100 to 250 V and runs from a standard US household outlet. The MetalFab needs 200 to 240 V, which in a home garage usually means a dryer-style circuit. If you do not have one, an electrician's quote belongs in the MetalFab's price, and xTool's own pages have disagreed on the circuit rating for the 1200W. For many garage buyers this one line decides the comparison.

Thickness is the second

On the makers' own figures the MetalFab reaches about 1 mm further: 4 mm against 3 mm in steel. Both are best-case claims. The X1 Pro page also says 5 mm in its marketing copy, but its spec table and FAQ say 3 mm. The MetalFab's 5 mm claim, for the 1200W, is the only one in this comparison backed by a named test lab. Fabricating & Metalworking reports that joints beyond about 2 mm need filler wire, which both machines feed.

What a first year costs

From our laser welder cost guide, using each maker's own wire and Black Friday machine prices:

X1 ProMetalFab 800W
Machine$3,399.99$3,999
One argon refill$69.99$69.99
5 kg ER308L wire$179.99$115.99
Laser safety glasses$194.00Included
Fume extractor$749.99$749.99
Total$4,593.96$4,934.97

After December 4, at $3,799.99 and $4,499, the totals are $4,993.96 and $5,434.97. The X1 Pro column buys separate glasses because the cost guide compares like with like; the X1 Pro also ships with a helmet and goggles, so you may not need them. Without the glasses its Black Friday first year is $4,399.96. Every further spool widens xTool's advantage: carbon steel wire is $32.99 from xTool against $79.99 from Xlaserlab, and stainless $115.99 against $179.99. None of these totals include an electrician, tax or shipping.

Documentation and claims

xTool publishes a test citation, a specific list of safety features and a gas specification. Xlaserlab's page calls the X1 Pro "FDA & CE MD Approved", which is not something the FDA does, and contradicts itself on the wire feeder and the weight. That does not make the X1 Pro a worse welder. It does mean you should get answers in writing before you buy one.

Which buyer each one suits

  • X1 Pro: home garages and mobile repair on 120 V; thin sheet, brackets, exhaust and panels; buyers who want the lowest entry price and can live with a 1-year warranty.
  • MetalFab 800W: small shops with 240 V; steel and stainless up to 4 mm; buyers who weld enough to care about wire cost and who value support and evidence.
  • Neither: if you need a long warranty, ARCCAPTAIN gives 3 years on the AIR 500 (500 W, 110 to 240 V, pre-order) and the LW1200 (1200 W, 220 V). The full field is in the best handheld laser welder guide.

What we could not verify

  • Weld quality on either machine; we have not used them.
  • Which wire feeder comes with which X1 Pro kit.
  • Whether the AFF5 code really stacks with Xlaserlab's sale price at checkout; we have only Xlaserlab's word.
  • The MetalFab's plug type and the correct circuit rating for the 1200W.

Machines in this guide

Figures are from each maker's own page. Links go to the maker and may be affiliate links; see our disclosure.

Xlaserlab X1 Pro

Welder + cleaner + cutter

Xlaserlab X1 Pro

$3,399.99

Standard Kit, Black Friday price, then $3,799.99 after December 4; Professional Kit $4,099.99, then $4,299.99

Code AFF5: 5% off sitewide, on top of sale prices at Xlaserlab

Laser
700W fiber
Cooling
Air
Maker claim
Welds 0.5 to 3 mm; cuts up to 3 mm
Warranty
1 year, plus 60-day replacement for major hardware failures
Weight
21 kg (its own FAQ says 19 kg)
Power input
100 to 250 V, runs on a US 120 V outlet

The cheapest fiber 3-in-1 here, and it runs on a standard US 120 V outlet. The lowest entry price also means the shortest warranty.

What we could not verify
  • The maker says it is "FDA & CE MD Approved". The FDA does not approve these products and we found no accession number.
  • The page says a dual wire feeder is included and, a few lines later, that it is optional. Ask which kit includes it.
  • Thickness claims range from 0.5 to 3 mm in the specs to "0.2mm to 5mm" in the marketing copy.

Price read from the maker's page on November 5, 2026. It will have changed by the time you click.

xTool MetalFab 800W

Welder + cleaner + cutter

xTool MetalFab 800W

$4,499

800W, shown as reduced from $4,699, with $500 off at checkout until December 4 ($3,999); the 1200W is $6,699, with $700 off ($5,999)

Laser
800W fiber (1200W also sold)
Cooling
Air
Maker claim
Welds up to 4 mm (800W) or 5 mm (1200W)
Warranty
12 months, longer plans sold separately
Weight
35 kg (800W), 38.2 kg (1200W)
Power input
200 to 240 V

The best-documented option, with a cited third-party test of the weld and goggles listed as included. The electrical specs differ between xTool's own pages, so check them before you wire a circuit.

What we could not verify
  • xTool's pages give three different circuit requirements for the 1200W.
  • Plug type is not stated.

Price read from the maker's page on November 5, 2026. It will have changed by the time you click.

Keep reading